Low CG Battery Tray for Axial 1/18 Capra UTB18
SKU:
AX04001
$15.00
$15.00
per item
This battery tray is a great upgrade for your UTB18 Capra.
- Lowers vehicle center of gravity by lowering the battery by around 20 mm (3/4")
- Clears links and servo throughout travel (clearance verified for stock parts, aftermarket parts may or may not clear)
- Fits the stock battery, as well as batteries up to 60 mm long x 30 mm wide
- Made from ASA, which is similar to ABS, but is UV stabilized.
If you have access to a 3D Printer, and would like to print your own, please visit the product download page here.
Easy to install:
- Remove 2 screws to remove the existing battery tray
- Snip off the thin mounts for the stock tray
- Slide in the Low CG tray and install the included M3x10 Button Head Screws
Please note:
- These parts are printed on a Bambu Lab P1S FDM 3D printer.
- FDM 3D Printed parts are printed to order, and your order will typically ship in less than 1 week (most orders ship in 2 days).
- FDM 3D Printed parts will typically have layer lines showing, as seen in the pictures, and may have some minor visual differences in color or appearance. There are a few ways to post-process these parts by sanding and filling in the layer lines, and then painting the parts, if you wish to have a smoother surface finish.
- FDM 3D Printed parts may not be as durable as injection molded panels, so care must be taken when handling the parts.