- Store
- >
- Vanquish Products Upgrades
- >
- JCAD Grille for H10 Optic - Narrowed Toy Style - Download
JCAD Grille for H10 Optic - Narrowed Toy Style - Download
This is a grille that fits the Vanquish Products H10 Optic styled to look kind of like a certain 'yota where the grille has been narrowed and the "T" and "O" were removed.
This is compatible with any headlight that fits the stock H10 grille.
The mesh grille is a separate piece and the letters can be printed in a different color like what is shown in the pictures. If you don't have a multi-material printer, you can print in one color and use a paint pen to color the raised letters.
The mesh grille will need to be glued in place, and I recommend any typical cyanoacrylate or super glue, just a dot or two near the top should be plenty.
The digital files include the .STL to use with any 3D printer slicer, but it also includes a pre-supported file with easy-to-remove supports. I recommend printing the supports with 1 wall and 5-10% cubic infill, 4 top and bottom layers.
The pre-supported file is intended to be printed at 0.16 mm layer height. If you print at 0.20 mm or thicker, it may be harder to remove the supports, and you will see layer lines easier on the curved surfaces. The grille is intended to be printed at 0.12 mm if you are using a 0.4 mm nozzle, or 0.08 mm if you use a 0.2 mm nozzle.
There are also a few .3MF files for Bambu Printers that have all the support settings ready to go.
This is designed to print from an FDM or Resin (MSLA) printer. I recommend printing the shell in PETG and the inner grill in PETG or PLA if you use an FDM printer like a Prusa, Ender, or Bambu Labs printer.
If you don't have access to a 3D Printer, you can purchase a printed version of this grille here.
This file is available under a personal-use license.